Forums › Forums › HSCC Events › 2019 Worker Thread Day Series 2 (6/2)
-
AuthorPosts
-
-
This is the worker thread for Day Series 2. Signing up for a worker assignment here will take the place of a worker assignment day-of. Please make sure to check-in with the worker steward at the event.
Trailer Towing (1): On site at 7:30-8:00
–Setup (4-5): On site at 7:30-8:00
– Sawyer Awald
–
–
–
–Waivers (2): On site at 7:30-8:00
– Emily Stafford
– Kaelan HinzCheck-In (1): On site at 7:30-8:00
– Frank ForcinoBlowing course (2): On site at 8:00
– Kristopher Hinz
– Steve AwaldTech (3-4): On site at 8:00
– John Ward
–
–
–Novice steward (1): On site at 8:30
– Randy CogburnWorker steward (1): On site before drivers meeting
– Debra MercerTiming (2): On site before drivers meeting
– Heather Ward
– Cameron AlbeaAnnouncing (2): On site before drivers meeting
– Luke Armstrong
–Teardown (4):
– Chris Polhamus
– Keith Young
–
–-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
T-WRX.
-
This topic was modified 4 years ago by
-
I’ll clean off the course.
-
Kaelan Hinz kindly requests “waivers and wristbands” duty
Kristopher Hinz can help with leaf-blower duty, or any other set-up help needed
-
Master of Timing and all things that go beep-boop-beep-kzzt
-
If you need me I will take care of Novice duties .
-
“To Whom It May Concern”
FYI,
The generator is full of treated non ethanol gas.
Both blowers are full of premix treated non ethanol gas.
The small gas can for the blowers is full of premix treated non ethanol gas.
The big gas can is 3/4 full of treated non ethanol gas.
As of 5-29-19Good luck all at TRSS
-
Luke for announcing (and probably teardown, depending on how late it goes).
-
Sawyer for setup.
Steve for blowing the course.Thanks!
-
Keith will help with Teardown
-
-
AuthorPosts
- You must be logged in to reply to this topic.